This is really a budget FPV Monitor for FPV. You only need to connect it to your own 11.1V Li-Po Battery, then you can receive 5.8G Video immediately. See the "Package Included" section for your information.

This is a 100% Brand New, with 7 inch LED backlight color TFT LCD display monitor, support parking rear view priority. Comes with an IR remote controller for a easy operation. Working perfectly with Car DVD, VCD, camera, STB, satellite receiver, and other video equipment.

You basically use this monitor with 5.8G Receiver.









Connection Diagram Between LCD Monitor, RC832 Receiver and Power Cable (all included)
What you need is to connect your own 11.1V Li-Po Battery (XT60) to the cable and it can supply voltage to both LCD Monitor and 5.8G Receiver (eg. RC832). Remember that you must install the Antenna on the RC832 Receiver before you connect the battery. Otherwise, it may burn the RC832 Receiver.



From 2015/08/28 - All Changed To Snowflake Screen (Good for FPV & RC Hobby)
Why Snowflake Screen? When the signal is weak, the screen will not turn Blue immediately, so you will have more time to prepare your next move. Please watch the video below.



Magic (Velcro) Tape, Hook & Loop (to be purchased separately)
You may use "Magic (Velcro) Tape, Hook & Loop" to tap RC832 & Li-Po Battery at the back of the LCD Monitor. It will be easier.



Features

• High-resolution picture
  
• Full color display
  
• Low power consumption
  
• 3S Li-Po Battery power supply recommended
  
• Weak signal with snow spot,signal lost with blue screen
  

Specification

• Item Name: FPV 7 Inch Monitor
  
• Screen ratio: 16:9
  
• Resolution: 800 RGB(H) x 480 (V) pixels
  
• Brightness: 500 cd/m²
  
• This 500cd/m2 has a better quality over 300 cd/m2.
• Contrast Ratio: 400:1
  
• Operation Voltage: DC 12V (3S Li-Po Battery)
  
• Switchable by button
• Signal System: NTSC & PAL
  
• Power Consumption: 6W
  
• Video: Two Ways Video Input (Yellow and White)
• Weight: ~415g
• External Dimension: 174(W) x 113(H) x 19(D) mm

Package Included

• 1 x 7" (Snowflake Screen) LCD Monitor (800x480 [Brightness: 500 cd/m²])
• 1 x RCX RC832 5.8GHz 32CH FPV Video Receiver With A/V and Power Cables
• 1 x FPV LCD Monitor (DC 5.5) & 5.8G (JST) Receiver Cable (Supply Power From Li-Po Battery)

** You need your own 11.1V Li-Po Battery (XT60 Connector) to power up the 5.8G Receiver and LCD Monitor.

Video

Example Setup & Testing with 5.8Ghz System

• RCX08-115 - 7" TFT LCD Monitor for FPV (12V / 800x480)
• RCX03-629 - Mini Digital FPV Camera
• RCX08-081 - RCX RC832 5.8GHz Video Receiver
• RCX08-082 - RCX TS832 5.8GHz Video Transmitter

Below is the real 800x480 500cd/m2 Testing.



Demonstration The Advantage of Snowflake Screen With 5.8G FPV - MYRCMART.COM
You will see snowflake screen when the signal is weak so you must turn around immediately



Screen Rotation Testing