The original of this H2214 motor shipped with the DJI Style Prop Mount. However, some people are not big fans of DJI so they prefer normal Prop Mount. So this H2214 motor offers an alternative for those who fly with normal propellers.
This is a great motor for Multirotor Copters between 1kg - 1.5kg of flying weight
. It is designed to replace DJI 2212 Motor and TM MN2214 Motor while quality is still maintained at a bargain price.
It assembled with Imported NMB Bearing and Copper Wire to maintain the quality. The motor has been balanced by Motion Balancing
Machine so you will see the colored balancing mud in the motor.
The flight test below shows approx. 18 minutes of hover time using 9443 and 4400mAh which is very good if you compare to DJI 2212 and MN2214 motors. Especially if you compare the price, they cannot beat RCX.
Standard Φ5mm Propeller Mount
This motor shipped with standard Φ5mm Prop Mount together with Slip-Resistant Locknut so this can lock up the propeller pretty well. For customers do prefer to use standard propeller.
With both 16mm and 19mm mounting options in M3 screw size, it will fit most frames in the market.
- Model: RCX H2214-9
- KV: 950KV
- Configuration: 12N14P
- Propeller Mount: Standard Φ5mm Propeller Mount
- Shaft Diameter: 4mm
- Internal Resistance: 0.139Ω
- Bearing: NMB
- Cable Length: Approx 20cm
- Approx 60g with long cables
- Approx 65g with long cables and Prop Mount installed.
- Suitable ESC: 12-30A (it depends on the Prop you use)
- Suitable Battery: 3-4S Li-Po
- Suitable Propeller:
- 8055 T-Type Propeller (can be directly installed by two 3mm screws because it has 4mm motor shaft)
- 8045 Standard Propeller - 3S or 4S LiPo
- 9443 / 9045 / 9047 Standard Propeller - 3S LiPo
- 1045 Standard Propeller - 3S LiPo
Bearing and motor shaft are common consumable parts of a motor. You are recommended to replace a new one from time to time after a period of flight time. Replacement of bearings and motor shaft could sometime fix mirror issues. It is better for you to keep some for spare.
- 6 x RCX H2214 950KV Multirotor Brushless Motor
- 6 x Set of Standard Φ5mm Shaft Prop Mount (CW - Clockwise)
** Please balance the propeller before flight. Unbalanced prop causes vibration more serious than the motor.
H2214 950KV + 1045 Prop + 4400mAh 3S - Approx 19 minutes hover time (1.2kg flying weight)
H2214 950KV + 9443 Nylon Prop + 4400mAh 3S - Approx 18 minutes hover time (1.2kg flying weight)
H2214 950KV + 8045 Prop + 4400mAh 3S - Approx 16 minutes hover time (1.2kg flying weight)